Sometimes I purchase bikes that I intend to disassemble. Often these are perfectly decent bikes, and sometimes very nice ones, that have suffered from what I call unfortunate upgrades.
Recently, a colleague asked me to help him to try out commuting on vintage steel which will be a nice change from his aluminum hybrid. My plan was to take a nice frame and build it up to his specifications. I purchased this 1970’s Raleigh Gran Sport that had gone through a few prior iterations, both good and bad.
The frame is full double butted Reynolds 531, with a Reynolds 531 fork, chrome stays and fork legs, with single eyelets front and rear. There is lots of room at the brake bridge and fork crown for fenders, even with the 27″ inch wheels it was designed for. So, converting this to 700c and adding some wider tires and fenders should work well.
The good upgrades included the Simplex SLJ front derailleur and Campy shifters shown at the top, which would have been upgrades from the ugly plastic Simplex models of this era. The spacing at the rear drop outs is 127 mm so we will have lots of options to consider for the wheelset – either vintage or modern. Actually, the bike was mostly intact from its original state except for some no name Aero levers (with shifter cables installed where the brake cables should be – yikes!), and some hideous bar tape. Because the bike looked kind of bizarre and was a bit dirty, it didn’t sell for much.
At the same time I spotted this 1980’s Viner that was even weirder looking, It sported some 1970’s suicide brake levers, ugly bar tape (again!) and a Shimano 105 headset shimmed into the head tube.
After just a bit of cleaning, the frame looks great. It’s an odd color – it looks black sometimes and brown/purple in low light. It is built with Columbus Cromor Tubing and is in great condition. These road frames from the 80’s can make nice conversions to 650c or 650b. It’s my size – 49 x 51. However, I am going to resist the urge to build it up for myself and will probably keep it in inventory until someone comes along who wants it built up.
There were a few nice surprises with both of these bikes. The Raleigh’s components were in great shape, and in addition to the Simplex SLJ and the Campy shifters, the prior owner had added a Brooks Professional Saddle (it would have come standard with a B-17). The original Stronglight crankset has many miles left on it and has the interesting feature of a built in chain guard. I may use this crankset for my friend’s build since he’s going to be commuting in his work clothes. The headset and bottom bracket are also original and very nice and will be re-used.
Sadly, the Viner had most of its original Campagnolo parts stripped off. Fortunately, though, the crankset and rear derailleur were left undisturbed:
The Viner also had a good wheelset – Maillard sealed hubs on Weinmann concave rims with stainless steel spokes – 36 front and rear. That seems like a much more robust wheelset than I would have expected, and the wheels will come in very handy for other projects that may come along. The bottom bracket fixed cup was in really tight. It is shown above with my removal tool still attached. Of course, it did help to finally figure out that the BB was Italian, so the fixed cup goes the OTHER way…