Welcome Home, Centurion

Here is lovely 1975 Centurion Semi Pro.  It has been well preserved over the decades by its original owner, and I am now the proud steward of this extraordinary machine.

As readers of this blog already know, I have been on a decades long quest to replace my crashed 1976 Centurion Pro Tour, a bike which was my only bike for over 20 years, and upon which I logged over 40,000 miles including tours of the Pacific Northwest, the San Juan Islands, and Canada, as well as serving as my daily commuter.  The Pro Tour was my original all-rounder.

So, when I saw this baby blue 1975 Centurion Semi Pro on eBay, I knew I would be honored to shepherd this bike into its next phase.

When the bike arrived, I unpacked it like a toddler with a new toy, and when I found these interesting frame transfers, they confirmed the information provided by the seller of the bike (who was not the original owner, but who sold it on their behalf).  The first human to ride this Centurion was a member of the US Cycling Federation (now known as USA Cycling), and had ordered the full Dura Ace upgrade for this bike, as well installing racing tubulars instead of the 27″ clincher rims offered as standard equipment.  The original owner was also a member of the League of American Wheelmen and had added these black and white racing flag transfers to the top tube.

While the bike clearly had a documented racing heritage, I was puzzled to find the Dura Ace crankset mounted with a chainguard.  And, you’ll note that the rings are not in racing configuration, but are a compact set-up with 52 teeth on the large ring and 39 on the small ring.  Both rings are Shimano Dura Ace.  Don’t forget to notice the lovely Dura Ace front derailleur.  The Dura Ace upgrade included:  the front derailleur, the anodized brake calipers, the drilled levers and the crankset:

These Dura Ace components are in amazing condition.  The drilled levers look new, but are given away by the gum hoods which have long ago lost their resilience.  The brake calipers are beautifully anodized.  The Dura Ace crankset with its 172.5 arms is in equally amazing condition, considering its 43 years in service.

I enjoyed seeing this unusual Huret wrap around chrome cable guide which provides shifter cable routing on both sides of the frame. This bike has zero braze-ons.  While it is built with Tange Prestige #1 tubing, during this era braze-ones were rare, and most needed accessories and cable guides were handled via clamps.

SunTour Mighty ratcheting downtube shifters

 height=

Shimano Crane GS drilled long cage derailleur

 height=

SunTour GS chromed dropouts with single eyelet and adjuster screws

The drivetrain consists of SunTour ratcheting Mighty shifters mated to the Dura Ace front derailleur and a Shimano Crane GS rear derailleur.  The Crane would be needed to handle the 52/39 rings up front.  The dropouts are by SunTour, and I don’t think I’ve ever seen anything as lovely as these fully chromed SunTour GS dropouts.  Their unusual shape made me look up this component in the SunTour catalog.  You’ll note that the design pushes the dropouts inward toward the hub.  I wonder if this simplified mitering the rear stays.

The pedals also provided a surprise – they are very rare Barelli Supreme pedals, with the optional alloy cages.  According to the site Classic Lightweights, these pedals “were considered the Rolls Royce of pedals. The spindle was made from Nickel Chrome Steel and they were machined for accuracy at the bearing surfaces and they came with a life time guarantee”  That, and the other component upgrades help to explain why this bike weighs in at 22 lbs.

The upgraded wheelset consists of 27″ Super Champion Competition tubular rims laced to Sunshine Pro Am low flange hubs.  A new set of Pararacer 20mm tubulars were installed as part of the deal.  I’m not sure how well the new tubulars were glued, so I will probably install a clincher wheelset on hand for this bike’s first test ride.

The bars were upgraded to 3TTT, mated to a Cinelli stem.  The original SR seatpost looks beautiful with this Cinelli leather Unicantor saddle.  Unicantors were the first plastic base saddles of this era.  I haven’t ridden one before and look forward to trying it out.  You’ll also note the Centurion’s impressive, chrome wrap around seat stay.

This Semi Pro has the following SN:  M5J00027.  Consistent with all Centurion frames I have encountered, and as documented by others, the first letter indicates the frame builder, but no one knows who that is.  Since both my 1976 Pro Tour and this 1975 Semi Pro start with an “M” I will guess they were both built by the same manufacturer, probably Japanese.  The second numeral is a “5” and that indicates the year built – 1975 – which is consistent with the bike’s components.  Another way to date a bike without a reliable serial number is by the components.

Some readers might wonder about the photos in this post.  For the most part I used my Panasonic Lumix mirrorless camera, but I also brought out my Leica Digilux 2 for some of the photos seen here.

I look forward to venturing out on this extraordinary bike, and will keep you posted on our progress.

And, here are some related technical and historical documents:

1978 Centurion catalog (the 1975 catalog does not seem to exist online) – vintage centurion site – http://vintage-centurion.com/literature/centurion-catalogs.shtml

1975 Shimano Dura Ace – disraeligears site – http://www.disraeligears.co.uk/Site/A_Complete_Line_of_Shimano_1975.html

1976 SunTour catalog – Velobase site – http://www.velo-pages.com/main.php?g2_itemId=12472

11 thoughts on “Welcome Home, Centurion

  1. Actually, it IS known who built these Centurions. A Japanese company by the name of Miki buildt your bike as well as the Semi Pro and Professional that I own. In addition they built some of the high end Sekais and some of the early Specialized Sequoias in the early 80s. You can see my Centurion Professional here: https://www.flickr.com/photos/43828356@N00/sets/72157604257636170/ And my Sequoia here: https://goo.gl/photos/cgBEHqKx7jy8VNqn6 Both are really well built frames!

  2. Well done, Nola! Congratulations!

    That is a fine Semi-Pro with some interesting history (and decals) for added intrigue. And that milky blue metallic is a color I’ve not seen done better on any other bike than the Centurion’s of that period.

    I look forward to seeing the final product all cleaned up and ready to hit the streets!

  3. Nola, As always a very nice post. A vintage racer , “right up me alley”, and a fine machine it is! I look forward to hearing how that first ride goes. With the fall weather, the timing could not have been better. I had a Centurion Elite RS once and rode that bike for two years quite regularly it was built up with Suntour Cyclone and featured Tange Champion Tubing and very light. A word about Unicanitor seats , wear cycling shorts as the plastic is very firm, I have two of these on a couple of my vintage racers and I actually like them a lot but not for blue jeans more than 5 or 6 miles. Enjoy the new “steed” , Joe

  4. Nola, I’m so happy you found your original make/model bike. I like the Cycling Federation decals. Very cool. Enjoy that bike at your heart’s best content 🙂

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s