1970’s Peugeot Mixte Porteur

Here is a a 1970’s Peugeot Mixte frame made from Reynolds 531 tubing that I purchased from a French seller several years ago.  My goal in building the bike up was to recreate a Peugeot PR65, whose photo is shown below, and whose style is evocative not only of Peugeot’s legacy and its consistent focus on women riders, but also of that amazing decade known as the 70’s. The PR65 Mixte model seemed to exist only for year or two.  I love the porteur bars and the cable routing, not to mention the super nice components. This 1978 Dutch Peugeot catalogue reveals that the frame was built with Reynolds 531 7/10 butted tubing and Nervex lugs, brazed below 600 degrees using silver, with brazed on cable guides.  Components included a Stronglight 48/38 crankset weighing 650 grams, which is lighter than modern day Ultegra and Dura Ace cranksets.  The rear derailleur was a Simplex SX410T with a 30 tooth cog capacity, and the front was a Simplex LJA302.

I decided to go all out and use Simplex Super LJ derailleurs front and rear.

This frame’s Reynolds 531 transfers were in excellent shape, and the bike shop sticker from the shop where this bike was first sold is up in the Pyrenees, on one of the Tour de France routes.  Drop-outs are by Simplex, and the fork is fully chromed underneath the paint.  No model number is indicated on the frame, and I am not aware of any other mixte frames that Peugeot built during this era with Reynolds tubing.

I used vintage Mafac Racer brake calipers, and a Pivo stem mounted with new Velo-Orange porteur bars. I had to spread the clamp a bit.  The shifters are Suntour ratcheting bar ends, which are great to use with these bars because they are close at hand.  Believe it or not, I used Raleigh’s steel brake levers because they feel much more solid and sturdy than the flimsier Weinmann and Dia-Compe levers of this era.

The wheelset is an early 80’s Shimano 600 set, with Wolber Super Champion Gentlemen 81 rims, and I managed to find some NOS Bluemels fenders complete with front mudflap.  I don’t want to talk about the hours spent installing and adjusting the Velo Orange front porteur rack.  Let’s just say that a certain amount of pain was involved.  The tight clearances also made it necessary to carefully adjust the fenders to avoid rubbing.

I ended up swapping out the Zeus crankset shown on the left post with this Stronglight, which has smaller chain rings and is better suited for the kind of riding I do.  I have had fun commuting and grocery shopping on this bike.

It takes a little while to get used to hauling a front load, but after a few rides, it starts to feel natural.  Now that the bike has been thoroughly test ridden and vetted, it’s time to put it up for sale.  It’s hard to properly price a bike like this.  Many hours went into creating it, and many dollars went into the parts, and most importantly, I hope is the value of the creative process.  But, the flood of low-priced Chinese-made bikes in the U.S. has created an expectation gap among bike consumers, and there is a real lack of understanding about why it is possible to buy a cheap bike from their LBS, and what the real cost of that cheap bike may be.  But, that rant is for another blog post.

More photos can be seen on this FB Album.