Category Archives: Porteur bicycle

A Peugeot PR 65 Arrives from France

Posted on by
7

Bluemel's Fenders

When I spotted what looked like a complete and all original 1978 Peugeot PR 65 on Ebay, I was thrilled.  Even though the bike would have to be shipped from France, I had purchased bikes from the seller before, so I wasn’t worried about its journey across the Atlantic.

2013-12-08 001 001

However, when this package arrived, looking like a giant turtle, it was with some trepidation that I began the process of opening its contents.

2013-12-08 001 0032013-12-08 001 007

The amount of labor involved in packing the bike was probably only exceeded by the amount of time it took me to get all the protective wrapping off.  However, even part way through the 1 1/2 hour process, when I finally caught sight of the paint and components, I was pleased.

2013-12-08 001 011 2013-12-08 001 010

The bike came through just fine, thanks to the protective materials used.  I wasn’t sure whether the component group would match the PR65 in this catalog, but as it turned out, all of the parts are original, including the polished Mavic 700c aluminum rims, high flange Normandy hubs (with helpful 1978 date code), Stronglight TS 3 arm crankset (very pretty), and a complete Simplex drive train.  The frame is built with Reynolds 531 7/10 tubing and Nervex lugs.  I believe it is the only Peugeot mixte frame built with Reynolds 531.

Peugeot PR 65 004 Peugeot PR 65 003 Peugeot PR 65 001 Peugeot PR 65 007

2013-12-14 001 010 - Copy 2013-12-14 001 005 - Copy (2) 2013-12-08 001 028 2013-12-08 001 023 Peugeot PR 65 005 2013-12-14 001 004

This bike came with a small TA front rack which mounts to the Mafac brakes and the fork crown, as well as lovely Phillipe porteur style bars.  The Phillipe logo is in great condition – its the image of a racer seen from the top, bent over his narrow racing bars.

The seller also installed drop out protectors to help insure that the fork and rear drop outs did not get smashed during shipping.

2013-12-08 001 020

2013-12-14 001 003 - Copy

Even so, the rear drop outs were slightly misaligned such that it was difficult to install the rear wheel.  A little “wanging” solved that problem.

All these photos were taken before restoration, a process I am now beginning.  In the meantime, this little Peugeot is hanging out in my shop with her sister.

2013-12-14 001 006 - Copy

1970’s Peugeot Mixte Porteur

Posted on by
18

peugeot-mixte-531-porteur-1Here is a a 1970’s Peugeot Mixte frame made from Reynolds 531 tubing that I purchased from a French seller several years ago.  My goal in building the bike up was to recreate a Peugeot PR65, whose photo is shown below, and whose style is evocative not only of Peugeot’s legacy and its consistent focus on women riders, but also of that amazing decade known as the 70’s. 1978_11 The PR65 Mixte model seemed to exist only for year or two.  I love the porteur bars and the cable routing, not to mention the super nice components. 1978_10 This 1978 Dutch Peugeot catalogue reveals that the frame was built with Reynolds 531 7/10 butted tubing and Nervex lugs, brazed below 600 degrees using silver, with brazed on cable guides.  Components included a Stronglight 48/38 crankset weighing 650 grams, which is lighter than modern day Ultegra and Dura Ace cranksets.  The rear derailleur was a Simplex SX410T with a 30 tooth cog capacity, and the front was a Simplex LJA302. L1010522L1010523L1010536

I decided to go all out and use Simplex Super LJ derailleurs front and rear.

peugeot mixte 531 porteur 010

This frame’s Reynolds 531 transfers were in excellent shape, and the bike shop sticker from the shop where this bike was first sold is up in the Pyrenees, on one of the Tour de France routes.  Drop-outs are by Simplex, and the fork is fully chromed underneath the paint.  No model number is indicated on the frame, and I am not aware of any other mixte frames that Peugeot built during this era with Reynolds tubing.

peugeot mixte 531 porteur 011peugeot mixte 531 porteur 012

I used vintage Mafac Racer brake calipers, and a Pivo stem mounted with new Velo-Orange porteur bars. I had to spread the clamp a bit.  The shifters are Suntour ratcheting bar ends, which are great to use with these bars because they are close at hand.  Believe it or not, I used Raleigh’s steel brake levers because they feel much more solid and sturdy than the flimsier Weinmann and Dia-Compe levers of this era.

L1010537peugeot mixte 531 porteur 013L1010529

peugeot mixte 531 porteur 008The wheelset is an early 80’s Shimano 600 set, with Wolber Super Champion Gentlemen 81 rims, and I managed to find some NOS Bluemels fenders complete with front mudflap.  I don’t want to talk about the hours spent installing and adjusting the Velo Orange front porteur rack.  Let’s just say that a certain amount of pain was involved.  The tight clearances also made it necessary to carefully adjust the fenders to avoid rubbing.

peugeot mixte 531 porteur 007L1010531

I ended up swapping out the Zeus crankset shown on the left post with this Stronglight, which has smaller chain rings and is better suited for the kind of riding I do.  I have had fun commuting and grocery shopping on this bike.

Small Ortlieb panniers fit fine on the Velo Orange front rack.

Peugeot PR65

After a rainy ride the bike stayed dry and clean thanks to the Bluemel’s fenders.

It takes a little while to get used to hauling a front load, but after a few rides, it starts to feel natural.  Now that the bike has been thoroughly test ridden and vetted, it’s time to put it up for sale.  It’s hard to properly price a bike like this.  Many hours went into creating it, and many dollars went into the parts, and most importantly, I hope is the value of the creative process.  But, the flood of low-priced Chinese-made bikes in the U.S. has created an expectation gap among bike consumers, and there is a real lack of understanding about why it is possible to buy a cheap bike from their LBS, and what the real cost of that cheap bike may be.  But, that rant is for another blog post.

More photos can be seen on this FB Album.