Rivendell Appaloosa

Photo courtesy of Rivendell Bicycles Works https://www.rivbike.com/

I recently ordered this lovely 2018 Rivendell Appaloosa frame.  It is designed for 650b wheels (a 51 cm frame) and has 135 mm rear spacing.

Why?  I have many wonderful bikes that I thoroughly enjoy riding.  But one thing I have never had since 1999 is a bicycle soul mate – that’s the year I crashed my 1976 Centurion Pro Tour.  Since then, while I have ridden many excellent bikes, I have never found that one bike that speaks to me, a bike that will take me into the next decades of riding, with comfort, competence, and a spiritual connection that is hard to explain.

In 2012 I built a 650b frameset while attending UBI’s frame building class here in Portland.  That experience helped me realize two things:  experienced frame builders have much knowledge and lore that newbies should respect and value. And, many cycling “experts” don’t know a thing about frame geometry, especially as it applies to riders under 5’6″.  One of the (few?) nice things about being an accountant by trade is that math comes naturally to me.  So, understanding the complexity of frame geometry has always been a high priority.

The 650b frame I built back in 2012 is currently being repaired with additional brazing on one of the lug joints that I didn’t do so well at filling with silver the first time out.  When that frame has been sand blasted and painted, I’ll build it up.

Rivendell Appy in shipping garb

Meanwhile, I received shipment of the Rivendell Appaloosa and 650b Velocity wheelset I had ordered earlier this winter.  When the frame arrived I was amazed to see that Rivendell had protected and packaged the frame in a way that only bike geeks can appreciate. As a buyer of bike frames, I have received countless frames shipped with no tubing or drop out protection.  Some eBay sellers simply do not have a clue as to how to properly ship a bike frame, so: Caveat Emptor.

As expected, this bike’s paint scheme is lovely, in fact, extraordinary for this price point.  The fork crown has ornate patterns, with mounting holes on top to accept stays for a front rack.  The Appaloosa head badge is fun and interesting (it’s a Rivendell!), and all the lugs have been filed and well brazed.  For a frameset that costs the consumer a mere $1,300, the value is clearly reflected in these features.  A Rivendell frame is one step away from custom, but inexpensive compared to custom options.

Is this a cargo bike?

Horseshoe seat tube/seat post drilling

Whether you want a kickstand or not – here is the bracket for it

Beefier than any other dropout – and with two threaded eyelets.

Two more eylets on the rear dropouts

3 rack mounts on the seat stays, plus the eyelets on the dropouts.

Silver tubes – butted and cro-mo

One thing to note about Rivendell frames is that they can have a longer wheelbase and longer chainstays than expected.  This Appaloosa has 51 cm chainstays. That means it is in cargo bike territory for its wheelbase.  For this frame (advertised as 51 cm size), I measured the seat tube as 50 cm and the top tube as 55.5 cm.  These measurements differ from the specs shown on Rivendell’s website.  My measurements are center to center.

There are a few condition issues with the frame.  The seat stay cluster was filed very thin, but the upper portion extends outward, and with a little paint loss, is not ideal.  Also the rear canti stud braze-ons are not well executed.  They look unprofessional, but after examination I think they will be safe to ride.  The head badge was not glued evenly to the head tube, as shown above.  Naturally, I am documenting these issues in case anything arises with the performance of the bike.

Because the frame is heavier than other frames that I ride, I expect to replace the FSA headset and the low-end Shimano bottom bracket.  I’ve got lots of interesting vintage options in my parts bin that are lighter weight and probably more likely to last through the ages, as well as provide better performance.  Smaller riders can benefit from weight savings, and I intend to focus on that as I consider options for components.

Mid Century Mercier Meca Dural

2017-01-16-036

2017-01-16-020 2017-01-16-011 2017-01-16-006 2017-01-16-022 2017-01-16-021 2017-01-16-0232017-01-16-044

2017-01-16-0382017-01-16-015

This winter’s crazy weather in Portland, Oregon finally gave me the time and focus needed to complete the restoration of a very interesting bicycle – a late 40’s/early 50’s Mercier Meca Dural.  The frame is constructed with aluminum tubes joined with ornate aluminum lugs and internal steel expanders.  The front fork is good old steel, but the rest of the frame is 100% “duralumin” – the same stuff that blimps were made from.

2017-01-16-026 2017-01-16-025 2017-01-16-0292017-01-16-001

Once I finally had the rear wheel’s axle spacing and dishing issues resolved (the 650b Mavic rims/F.B hubs wheelset installed replace the incorrect 700c wheels on the bike when I acquired it), I could devote time to mounting the 650b tires and dealing with fender line issues.  This bike’s beautiful hammered Le Martele Lefol fenders were meant for tires a bit larger than the Panaracer 40 mm Col de la Vie tires I mounted to the the vintage Mavic rims.  That meant spacers. And, my favorite spacers are wine corks.  Therefore, it was necessary and advisable to open a couple bottles of champagne (the higher priced, the better), to obtain the corks needed to meet this objective.  The photos above show the champagne corks installed on the front and rear fenders.

2017-01-13-0092016-01-07-0142017-01-13-004 2017-01-15-003

Another issue was the chain line adjustment.  Once I had the rear derailleur installed – a NOS Simplex Grand Prix – it became clear that even after adjusting it to push the derailleur as far in toward the frame as possible, and after re-spacing and re-dishing the rear hub, the chain line was off.  It was going to be necessary to push the crankset away from the frame, by a few millimeters.  Fortunately, with this unique frame’s method of joining of the bottom bracket with brass bolts to the chain stays, I determined that I could remove the bolts, and then re-position the bottom bracket accordingly.  I removed the bolts from the frame, lubricated the bottom bracket shell – which is a beautifully machined aluminum cylinder, then began the process of moving it slightly over to the right.  This took the work of a mallet as well as my Lozan BB lockring wrench, but finally I moved the BB cylinder enough to provide the chain-line I needed. One of the many interesting things about this bike is that the BB axle is hollow (to save weight) and the crank bolt on the left side is threaded backwards.  Something not to forget in the future!

2017-01-16-060

Ideale Model 80 leather saddle

2017-01-16-064

Simplex shifter

2017-01-16-057

Luxor headlight bracket

2017-01-16-055

Luxor 65 headlamp

2017-01-16-053

C.M. calipers with reversed hardware

2017-01-16-052

Vintage french rack, Huret wingnuts

The bike’s leather saddle – an Ideale Model 80 – might be worth more than the bike itself if eBay seller pricing is to be believed.  The saddle is a little dry, but after reconditioning it, I think it will prove to be very comfortable.  The “C.M.” brake calipers are a long reach mechanism from the 40’s that I used to replace the incorrect CLB 700 brakes that were on the bike when I purchased it.  You’ll note from the photo above that I reversed the hardware on the rear brake to accommodate this bike’s brake routing – to allow the cable to enter from underneath the caliper.  I also installed a French rear rack from this same era, as the original rack was missing.

2017-01-16-059

The above photo shows that the seat post lug is pinned, as compared to the rest of the lugs on this bike which are joined with internal steel expanders.  There were other methods of joining aluminum tubes back in the day when these bikes were built, but I think these Meca Dural examples are likely to survive the test of time.  We’ll see once I get this bike out on the road.

2015-12-31-009

Before

2017-01-16-049

After

It’s funny (but not really) that the before and after photos of this bike don’t look that much different.  Perhaps what’s different is my perspective – the bike is now ready for a test ride, with appropriate components, and a period-correct restoration to make the bike 100% rideable.  I threw my leg over the saddle today just to see how the bike felt and I was startled to find that this bike fits me perfectly.  I can’t wait to get it out on the road.  For that, the weather gods must provide.

2017-01-16-014

 

When in Doubt, Accessorize

2016-12-18-029

2015-12-17-026

Late 40’s/early 50’s Mercier Meca Dural, as originally acquired – with incorrect 700c wheel size and various missing parts.

To counteract the too frequent headaches and setbacks on the mechanical side of bringing this Mercier Meca Dural back to life, I decided to focus on the “extras” that are often regarded as nonessential accessories – chain guards, lighting, and racks.  As fashion experts know, it’s the extras that really make one’s ensemble come together.

2016-12-18-042

Baffling chain guard hardware.

Mounting a chain guard, however, proved daunting.  I had a nice aluminum Rigid-branded guard from this same era, which fit well around the 46T Louis Verot chain ring.  But, one of the odd things about this bike is that all the frame mounted braze-ons and brackets are missing.  I had this chain guard hardware set, shown above, that included a baffling assemblage of clamps, threaded bolts, and numerous nuts and washers, but I couldn’t determine how to make this hardware work on this bike and with the Rigid-branded chain guard.

mounting-of-chainguard-example

Creative chain guard mount – spotted in downtown Portland.

Fortunately, while downtown waiting to catch a train a while back, I spotted this wonderful Raleigh Sports with an interesting chain guard mounting solution.  I snapped this photo with my iPhone so that I wouldn’t forget what I saw.  Meanwhile, I searched the internet for chain guard mounting lore.  Velo-Orange came to the rescue, with a nice discussion of different kinds of frame braze-ons for chain guard mounts, as well as how to configure hardware when your frame lacks such mounts.  You’ll note in the photo above that this cyclist has mounted the chain guard using eyebolts on the guard, which make it easy to adjust the chain guard when used with the long threaded bolts – with the threaded portion attaching the the frame clamp.  Using these ideas, I anticipate that I’ll get the Rigid chain guard mounted properly, but I can see that I’ll need a bit more in the way of hardware.

2016-12-18-009

Luxor 65 headlamp.

2016-12-18-011

Creases at back of lamp to hold cables in place.

2016-12-18-013

Very pretty branded Luxor stem clamp.

Moving on to this bike’s lighting system, I re-installed the front Luxor 65 headlamp back on to its Luxor branded stem mounting bracket.  Luxor lighting is very well thought of, and there is even one enthusiast who loves Luxor 65 so much that  the cyclist machined a copper heat sink for their beloved Luxor light so that LED’s could be used with this system.

I don’t plan to go that far, but I am impressed with the quality of this light.  When I was setting it up, I noticed creases at the back of the headlight shell that I thought were caused by the shell being dropped and dented.  But once I had the light mounted, I could see that the creases were in the perfect position to hold the front brake cables in place.  I don’t know if these dents were a fortunate mishap – but it works for me.  You’ll note that I used red cable housing for this build.  These housings are vintage from the 1970’s – they are a darker red than the new red Jaguar cables, and match the dark red color in the Mercier head badge.  Hopefully, the fashion police will agree with my choice.

2016-12-18-016 2016-12-18-020

Installing the lighting meant coming up with a fork mounted dynamo, which this bike would have originally had (as there is no dynamo mount on the seat stays).  I located a vintage dynamo fork bracket, and installed it on the fork blade over some black cloth handlebar tape, to protect the steel fork.  For now, I have set up this very lightweight and free spinning Soubitez Argil dynamo, which is not from this era, but dates probably to the 1960’s.  If it works well, I’ll keep it.  If not, I’ll source a dynamo from this era.  You’ll see that the fork bracket includes a grounding set screw in the middle of the bracket.  This provides the electrical ground for this system, so it needs to contact the steel fork. But, you don’t want to screw it in too far, as it could damage the fork.

2016-12-18-036   2016-12-18-032

Finally came the ideas for a rear rack.  I have had this interesting 1940’s steel rack in my shop for awhile.  I haven’t found the right project for it.  I dry mounted the rack on the bike and found that it seemed to fit well.

2016-12-18-037

2016-12-18-040

This steel rack is reasonably light weight and features fully adjustable stays, so that it should fit on pretty much any configuration.  It is a bit rusted and needs to be cleaned and polished.  It’s not the strongest rack out there, but should work well for this bicycle, which was designed for city riding.

600-mercier_mecadural

One of the fun things about this Mercier Meca Dural, is that it served as the inspiration for Public Bike’s Champs-Elyisees d8i bicycle. The above photo provided their inspiration.  When I have completed the restoration of my Mercier Meca Dural, I hope to be equally inspired, and inspiring.